Product Thoughts: Atomos Digital Recorders

NOTE This isn’t a product review, because I haven’t used these devices. I wrote this after a series of conversations with the Atomos team, including its CEO and lead engineer, to explain what they do and why filmmakers would be interested.

It was a couple days before Thanksgiving, and I was meeting Heather Williams, Global Business Development Manager for Atomos for lunch to talk about their two digital recorders: the Samurai and the Ninja.

A BIT OF BACKGROUND


(Image courtesy: SanThink.com)

When the camera manufacturers shifted from tape to tapeless media recording, they also needed to shift from recording on video tape to something else.

Most chose some form of a memory card because it was small, lightweight, and relatively low-cost. (Recording direct to a hard disk was an option used by some cameras because of its flexibility, which we will talk about in a minute, but the cost of including a hard disk with the camera would have made the camera competitively too expensive.)

The problem with recording to cards, however, was that they didn’t hold a lot of media – not given the gargantuan size of video files. So, the camera folks needed to find ways to squeeze media from very large files coming off the sensor into something small enough that it could be squeezed and recorded in real-time to a card.

And from that challenge was born all the different codecs that we are wrestling with today: P2, AVCHD, H.264 and all their cousins.

The good news is that recording to cards works. Inexpensive, high-quality video recording is a reality.

The bad news is that when these fresh-from-the-sensor images get squeezed, a LOT of data gets thrown away. And, because of the mathematics used to compress the files, the files become very difficult to edit.

PROBLEM 1 – LOST DATA

The first big problem is lost data. Imagine a five-gallon bucket filled with water. Now, dip a one-cup measuring cup into the bucket and fill it full of bucket water. Next, empty the bucket and pour the one cup of water back into the bucket.

You still have pure bucket water, but, now, there is much less of it. You can’t do the same things with one cup of water than you could with five gallons of it. Additionally, when I dump the water back into the bucket, it has the FORM of a five-gallon bucket, but only the CONTENTS of one cup of water.

While this is an analogy, the problem is that your video is so compressed to fit on the card that a lot of very useful data gets thrown away. And, once removed, it can’t be put back. Transcoding, which converts your media from the camera native format, say H.264, to another, say ProRes, can only change the format of the media, it can’t reconstitute lost data.

PROBLEM 2 – HARD TO EDIT

Another problem with highly compressed media is that the files become very hard to edit. That’s because files like H.264 or AVCHD convert the video from a series of individual images (called “I-frames”) into a group of pictures (called a “GOP”). This does a great job of removing image data, but adds complexity during editing.

Adobe Premiere Pro CS6 and Apple Final Cut Pro X seek to mitigate this problem by harnessing the graphics processor or graphics card to speed things up. This works, but an even better choice is not to compress the file in the first place. The only downside to not compressing is that your file sizes explode in size.

PROBLEM 3 – REDUCED COLOR SPACE

Compressed media describes colors using an 8-bit model, which reduces the potential range of colors to 256 steps from, say, the complete lack of red to the maximum amount of red.

However, it is generally agreed that color images require a 10-bit model (1024 steps) to accurately represent the colors that we see. (12-bit – 4096 steps – is the ideal, but very few cameras shoot with that range and the resulting file sizes redefine “seriously huge.”) 10-bit color also minimizes banding, which are thin vertical lines seen in color gradients.

In general, the higher the bit-depth, the more image quality you are able to retain when doing effects and color grading. The downside is the greater the bit-depth, the larger the file size.

THE SOLUTION – A DIFFERENT WAY TO RECORD MEDIA

The solution is not to compress your video in the first place; or, rather, to compress it as little as possible. That’s where digital video recorders come in.

Most cameras provide either an SDI (for standard definition video) or HD-SDI or HDMI (for high-definition video) output connector on the camera. This provides a full, uncompressed video stream directly from the sensor. Digital recorders, like the IO-XT from AJA, the HyperShuttle from Blackmagic Design, and the Samurai and Ninja recorders from Atomos, grab that sensor signal and record it directly to hard disk, removing the need to compress the video.

The benefits to digital recorders are that:

The downside to these digital recorders is:

WHAT DOES ATOMOS PROVIDE?


(All images are courtesy of Atomos)

Atomos provides two digital media recorders: the Samurai (illustrated above) and the Ninja. The two units are similar in function. The Samurai accepts HD-SDI signals, while the Ninja accepts HDMI. While the Samurai has a slightly larger monitor, both systems are designed to let you watch your video either during recording, or later playback on set, so you can make decisions on image quality and composition directly during production.

A hard disk is a hard disk is a hard disk. We don’t need to explain how they work. However, I’m sure you can imagine the benefits a very large hard disk provides for storing media files; far exceeding even the largest memory card. Hard disks win hands-down for speed and storage capacity. (Memory cards win on price and physical size.)

As I was talking with Heather, I became intrigued with the monitoring capabilities that the Samurai provides. Both units attach to your camera and directly monitor your video on the recorder, bypassing the smaller monitor built into the camera itself.

THE CONTROL INTERFACE

The interface for controlling the camera is really simple: press Record or Play, (or, ah, Stop). Both units display camera timecode, along with the video format it is recording. (In this example, the Samurai is recording ProRes HQ 1080i/60.)

NOTE: Recently, Atomos added support for Avid’s DNxHD format, in addition to ProRes. Details are on their website.

ADDITIONAL MONITORING OPTIONS

But there are three monitor options that both units provide that I really like – especially because we’ve never seen them in camera or NLE monitors before.

The first is False Color. Though this image uses the example of a motorcycle, the real advantage of false color is proper exposure of skin tones. Caucasian skin under normal lighting registers 50-70% of gray scale. Black skin under normal lighting is around 15-35% of gray scale. These two gray ranges, indicated on the right, help you to set your exposure so skin tones look right.

This one feature alone can be a huge help during production because all you need to do is make sure that skin looks “gray” and you have your exposures set correctly. This also spots excessive highlights on skin that is a dead giveaway for “bad exposures during production.”

Next is focus assist. This is designed to show which elements of the image are in focus and which are soft. (Focused edges are indicated here with red lines.) What this is actually doing is searching for clearly defined edges. When an edge is sharp, it is assumed that part of the image is in-focus. While using edge detail to determine focus can lead to false positives – I mean, nothing beats your eyes for checking focus – it is helpful to have feedback on focus because HD demands tack-sharp images. Plus, the larger monitor sizes on a digital recorder make it easier to spot focus problems.

Peaking, illustrated here with black stripes on the white side of the motorcycle, is designed to prevent over-exposing highlights. While this has been a staple of many camera monitors for a long time, the larger monitor size provided by both these digital recorders makes over-exposure easier to spot.

Another feature designed for those of you using Final Cut Pro X, is the ability to mark entire shots, or portions of shots (as illustrated here), as a Favorite or Rejected. This metadata is retained with the clip when it is imported into fCP X, which saves you time getting organized for the edit later.

NOTE: Marking a clip as rejected does not prevent it from being imported.

MISSING AUDIO FEATURES

Still, there are a few missing audio features you should be aware of, especially for larger productions.

Atomos has announced a new unit, Ronin, available in early 2013, which supports 2-channel stereo XLR connections, among other new features.

SUMMARY

I’ve heard about digital video recorders for a long time, but haven’t had the opportunity to study them before.

The benefits of longer record times, improved image quality, and reduced import times make them a very desirable accessory on larger shoots. And the advanced monitoring functions can help prevent costly lighting or exposure mistakes during production.

At the very least, these devices can help improve your images on set while reducing your stress during production, and then save you a ton of time during editing.

 


Bookmark the permalink.

22 Responses to Product Thoughts: Atomos Digital Recorders

  1. affreeman says:

    Thanks Larry; hadn’t heard of the Atomos recorders until now. Have you seen the recorders from Sound Devices? We’ve been using a PIX 240 for about the last year, with great results. I understand they have a new model out, the PIX 240i, with an improved monitor.

    When we use it we record the 4 channels of audio from our camera sent via SDI, but the PIX devices also have XLR inputs for a separate audio feed.

  2. Ken Ackerman says:

    Thanks from me too & I hadn’t heard of Atomos either.

    I’ve been casting around trying to decide what the most effective approach to shot monitoring and recording might be for me. What it comes down to is using my 17″ 2010 MacBookPro for both.

    The MacBook Pro has a 500 GB 7200 rpm drive, 8 GB ram, Firewire 800 in/out, giga bit ethernet, Express Card 34 slot, and a matte finish screen. The screen resolution is HD up to 1920 x 1200 (native). This should be sufficient for my DVX 100B, which is DV = file size & data rates much lower than HD.

    For me, the pro’s are: I own the MacBook Pro; it’s one box (even though big); F C Studio 3 on board, battery for max location flexibility.

    The con’s are: separate tripod required to hold it; bulky by comparison; 1 TB disk or SSD may be needed.

    Haven’t used it yet, but will as soon as I can escape from editing a project. Downsides anyone?

    Ken

    • Larry Jordan says:

      Ken:

      The only real limitation of using your MacBook Pro and FCP 7 is that you need to capture media in real-time. That means using Capture Now. And Capture Now replaces all your timecode with its own.

      Also, you can’t use scopes to monitor levels during recording, you can only record.

      Also, because it is recording a QuickTime file, if there is a glitch in the recording AT ANY POINT, and the QuickTime file is not properly closed – say due to a crash, battery failure, or suddenly quitting the program – ALL of your data is unavailable. The big limitation of QuickTime is that the file must be properly opened, recorded, and closed for any of your data to be available.

      Your system will work – just be careful about what it doesn’t do.

      Larry

      • Ken Ackerman says:

        Larry,

        Thanks for the information. I wasn’t aware of that. I do plan to get location shooting direct to disk software, similar to what DV rack did. Red Lightning has a package for Mac called DV Monitor Pro for direct to disk recording to FCP 7. I’ll have to check out how it records. I’ll let you know what I find out.

        ken

    • Ken, I sometimes use Capture Now on my MBP when a client wants to walk away with the footage immediately following a shoot, but I always have a back-up. There are just too many things that can go wrong. The firewire cable from the camera to the laptop is not secure in the way a BNC cable is secure and could easily be pulled out inadvertently. Computers freeze and crash occasionally. If the computer hiccups and FCP sees a dropped frame, the recording will abort. In my scenario I am recording on an external USB hard drive, and if the USB cable should come loose again the recording crashes.

      For all these reasons, I always record either in the camera or on an external recorder — in my case a Sound Devices PIX 240 — so that if something goes wrong with the capture now I have a backup. The client will have to wait for me to either ingest from P2 cards or copy the QuickTime file from the PIX, but at least the footage isn’t lost.

    • Steven says:

      Ken,
      I just worked on a project where I had to record a bunch 1.5 to 2 hour training class sessions with my HVX-200. My Firestore recently died and I my only low cost option was to use my MacBook Pro and FCP7 capture now. My tests before the event showed that it worked but then durning the event I had problems. I had to record 24 sessions. During a couple of them, the capture failed completely and I had to restart immediately. During a bunch more the capture now ran the entire session but there were a couple of breaks in the video. A second or two was lost between the clips even though the capture appeared continuous.

      I don’t know if the data rate of DVCPRO HD had anything to do with it. And there was no predictability to when the clips broke. Not lenght of time recording or movement of camera. You might be fine with DV footage. If you are planning for something like this long format recording, I would do extensive testing to see if it is reliable. For field production, with short takes you might just get away with it.

      Good Luck,
      Steven

      • Ken Ackerman says:

        Steven,

        Thanks for sharing your experience, it gives me pause. Testing is definitely on the agenda now.

        I’m hoping that I will not have to spend significant money on more hardware to accomplish direct to disk recording at this point.

        I do plan to acquire location shooting direct to disk software to ease the process. As far as I know, Red Lightning’s DV Monitor Pro is the only Mac to FCP 7 package for DV left standing.

        Adobe had “On Location” after they purchased DV Rack but in April of this year discontinued the product. Why companies spend big bucks to buy other companies and then turn around a few years later & scrap it is beyond me.

        Ken

        • Larry Jordan says:

          Steven:

          Companies acquire software for the underlying technology. The costs of maintaining software “in perpetuity” is prohibitively expensive unless the sales are there to justify it.

          Recording a live camera direct to disc using FCP 7 is not recommended. There are better options. FCP is not a good digital recorder.

          Larry

          • Ken Ackerman says:

            Larry,

            Would mind noting what some of those other options are besides Atomos and it’s close competitors?

            The Red Lightning DV Monitor Pro that I mentioned above records direct to disk without going through FCP. it records a separate file that gets exported as Final Cut Pro XML file that launches FCP, loads the clips with shot details & logging already done. The camcorder’s start & stop record switch controls the start & stop save to the separate file (not through FCP).

            Their words:

            “Direct to Disk Recording
            Save time by recording direct to disk. Don’t waste time capturing tapes ever again! …..

            Start editing the instant you are done shooting. Export to a Final Cut Pro XML file that when double clicked will launch Final Cut Pro and load all the clips with their shot details ready to edit.”

            http://www.redlightningsoftware.com/Features.html

            The software is Mac only and is built to “Supports NTSC and PAL DV FireWire Cameras”.

            Would that be a better choice?

            Ken

  3. duncan says:

    Larry, thanks for sharing this. How much information can be recorded on these Atomos recorders in terms of GBs or time?
    Thanks, Duncan

    • Larry Jordan says:

      Recording time varies based upon the size hard disk you use with it. Currently, it supports drives up to 750 GB in size, which equates to 16.5 hours, according to the Atomos website.

      Larry

  4. Nic Fay says:

    The Samurai does not live up to the marketing promise. Major issues with this device. First unit was replaced for regular shutdowns. Current model randomly but regularly loses audio sync. Underwhelmed.

  5. MoDa says:

    Good morning Larry,
    If HDs are a great idea (& I agree with you that SD chips are good), why didn’t camera developers stay with in camera HD’s?

    • Larry Jordan says:

      Internal hard disks (HDs) in a camera would cause the camera to:
      * Cost more
      * Weigh more
      * Require more support
      * Require more maintenance

      High-end cameras can afford this, low-cost cameras can not.

      Larry

  6. Dmitry says:

    Hi, Larry. Thank you very much for you lessons on video editing, which helps me a lot in studying Apple programs (FCP, Compressor). I like the idea of recording uncompressed video as I like to hear music on vinyl LP or CDs rather than MP3. I still use miniDV video camera Sony HC-48e, although I realize that it is time to make some up-grading. Concerning the quality of the video data going from the sensor of amateur’s video cameras (f.e. Sony CX-740), I would like to know whether these data are really 10-bit model? The compressed video which is recorded to the cards is 8-bit model, as I know.
    Thanks, Dmitry.

  7. Sandeep Das says:

    Hi Larry,
    We are using Panasonic Varicam along with the SAMURAI to record the footage. We need an output that is 25 fps but the footage captured on the Samurai show a video rate of 60fps in FCP. The varicam was set to 25fps when we shot the footage. Any idea why this is happening and how I can get the footage to 25fps in FCP.
    Thanks.
    Sandeep

  8. Sandeep Das says:

    Hi Larry,
    We are using Panasonic Varicam along with the SAMURAI to record the footage. We need an output that is 25 fps but the footage captured on the Samurai show a video rate of 60fps in FCP. The varicam was set to 25fps when we shot the footage. Any idea why this is happening and how I can get the footage to 25fps in FCP.
    Thanks.
    Sandeep

  9. Dean says:

    I have recorded hours of vision on my Samurai and its a bit glitch. I have recorded it on pro ress 422 and i can see glitches when i watch the vision back. Also when i watch it on my mac laptop its really noticeable and when i import it into premier to edit i get red and green flashes through out the vision.

    how can I fix this?

    Kind Regards
    Dean Whiston

  10. Paula says:

    Hi Larry,

    I’m making a feature film and they gave me a raw material (AVCHD) and a material recorded with Atoms Ninja.
    I’m gonna use FCP7 and after editing the movie, they’re gonna use the material in AVCHD to finalize it.
    Do you think it’s better to convert the raw or can I use Ninja’s material, even if the clips are named like NinjaXXXX?

    Regards.
    Paula

    • Larry says:

      Paula:

      AVCHD will need to be transcoded to ProRes 422 using Log & Transfer in FCP 7. It can’t edit AVCHD natively. Given that, it may be easier to edit the Ninja native format. Remember, once you copy the clips to your hard disk, you can rename them.

      As with all things, test your workflow before beginning the project in earnest.

      Larry

Leave a Reply to affreeman Cancel reply

Your email address will not be published. Required fields are marked *

Larry Recommends:

FCPX Complete

NEW & Updated!

Edit smarter with Larry’s latest training, all available in our store.

Access over 1,900 on-demand video editing courses. Become a member of our Video Training Library today!

JOIN NOW

Subscribe to Larry's FREE weekly newsletter and save 10%
on your first purchase.