FCP X: High-speed Export Trick

Posted on by Larry

FCP X: High-speed Export Trick

This last week, my team and I spent a lot of time rapidly editing videos for our upcoming Adobe Audition CC training release. The whole series is about 80 movies, and over the last few days, we’ve edited, exported, and compressed more than 40 of them.

My role in this process, aside from the original design and recording, is to review the final edit of each movie, output the file, and compress it for the web. Since spare time was in short supply, I was looking for anything I could do to speed this process.

And that was the genesis of this article.

THE BACKGROUND

Because I didn’t want to install a beta version of Premiere Pro CC on my main editing system, we edited the videos in Final Cut Pro X. Here, for instance, are some of the movies in Chapter 2 – Learning the Interface, displayed in the Project Library.

As you may know, FCP X does not have a Batch Export function. However, as I discovered, that’s not a big deal, because it does have background processing for all exports, which, if you know the secret key combination, makes exporting very fast.

THE TECHNIQUE

Select the first movie you want to export by clicking its name in the Library.

Type Command+E, which is the default keyboard shortcut for exports. (You can set this in Final Cut Pro > Preferences > Destinations.)

This opens the export window. I always export my projects as Master Files, using ProRes 422,  which is the default setting. I then compress the files for the web as a second step on a different computer. However, this Export window remembers the settings you used on your last export, so spend a minute customizing this as necessary. The only changes I generally make are to turn Chapter Markers on, or off.

Press Enter to accept all the current export settings.

The File Save screen appears, where the default name is the name of your project. I always name my projects in a manner suitable for exporting, so I don’t need to change anything.

This window also remembers the last folder location to which I exported a file. Prior to beginning this project, I created a folder called, in this case, “Adobe to Compress,” as the single location I would use to store all my exported files.

Since nothing in this window needs to change, I press Enter as soon as it appears. This accepts the default file name and location.

NOTE: When I am not working on large projects that generate lots of files, I normally export to a folder named “Exported Files to Compress.” The key is not the name of the folder, but to have a common destination, so I don’t have to keep wondering where I stored an exported file.

Final Cut starts exporting the file and returns to the Project Library. Press the Down Arrow key to move down the list to the next Project that needs to be exported.

Then, type Command+E to begin the export process again.

I timed myself. One chapter had 11 files to export. I had them all exporting in less than 30 seconds; which is about how long it would take me to create a batch export list in Final Cut Pro 7. Here is the key sequence:

Cmd+EEnterEnterDown Arrow [ repeat as many times as you have files to export ]

Final Cut Pro X exports in the background. This means that, as long as you don’t close the application, you can view other files, continue to edit, or, just let the system run. Any necessary rendering will also be done during the export. There’s no limit to the number of files that can be queued for export.

To monitor the status of your exports, click the small clock to the left of the timecode display in the Toolbar.

This opens the Background Tasks window where you can monitor your exports. When all files are exported, indicated by a value of 100% in the small clock, or no active jobs in the Background Tasks window, you can quit Final Cut Pro X.

I rarely have more than 12 media files to export at one time and this technique makes exporting very, very fast.

 

Visit our website to see Final Cut Pro Training & more!


Bookmark the permalink.

18 Responses to FCP X: High-speed Export Trick

  1. Jakob Peterhänsel says:

    Remember that fcpx also does Not need the projekt to stay the same while the export is running!
    You can continue editing the event, or even remove the content completely and replace it with other content you need exported, as soon as you have queued the export!

    Very handy if you just need export of event snippets 🙂

  2. Erik Olsen says:

    Excellent workflow… have been using this method to publish to YouTube, but it takes for ever…. I like the idea to export to a master file default ProRes 422. After sending files to the compressor to crunch for YouTube, is there an automatic publish to YouTube option in compressor as it is in FCP-X?

  3. Lisa Johnson says:

    omg. I can go to bed tonight instead of staying up all night doing this one at a time. I have 17 short videos to export. Thank you, thank you, thank you.

  4. Todd says:

    What version are you running? When I save the 1st file it will not go back to the library until the first file is exported. Help?

    • Larry says:

      This works in any version of FCP X starting with 10.0.6.

      REMEMBER, you must be IN the Project Library when you start exporting. Don’t export from the Timeline itself.

      Larry

  5. Egon Freeman says:

    There is a small bump with exporting in FCPX, though. The total completeness does NOT reflect the actual export status. As in, 20% doesn’t mean “20% of all exports”. So You really HAVE to look at the details to tell how for along You actually are…

    You see, what happens is – when FCPX finishes an export, it removes it from the queue, and the “100%” gets recalculated on the remaining files. So if You have 5 files to export, after the first one is exported at total 20%, it’ll go back down to 0% and finish the second file at 25%, go back to 0%… and so on (34%, back to 0%…, 50%, back to 0%… and finally 100%). The exports will gradually SEEM faster as well, but that’s just a side-effect of this math. It’s technically correct, yes, and completely useless.

    Also, IIRC, at 10.0.9 I am sure it works no matter where You export from. You can mix and match, and they will still finish. I’m pretty sure it worked like this before.

    I think this is also the only way to get rendering done without pauses for editing (some background tasking, meh). The downside is that You end up without a complete render in the timeline (!) – and this can sometimes be a bummer.

  6. Egon Freeman says:

    On a side note (and hence a separate post), for those of You automator-inclined, it IS possible to have FCPX give You the total percentage (by the use of “tell application ‘Final Cut Pro’…”), as it doesn’t move around in the control tree. That way, when the 100% holds up for, say, more than 5 minutes (to be extra-careful), You can “Tell application ‘System Events’ to Sleep”. It’s a nice fire-and-forget method, and it hasn’t failed me yet.

    So I had a lot of extra time on my hands one day…

  7. Claire says:

    For some reason this isn’t working for me. Everything seems fine until the file starts exporting. Then it’s impossible to do anything on FCP X… the down arrows don’t scroll through projects and the screen shows “Exporting “Story Name” to “Location” with a percentage of how far along it is. Am I doing something wrong?

    Thanks for your wisdom on this!

    • Larry Jordan says:

      Claire:

      It may be that your computer is too slow, or that you don’t have enough RAM. There’s no “wrong” way to do this – so I tend to suspect your hardware.

      Larry

    • Jimmy Q2 says:

      I run fcpx 10.0.5 and can do this. I found that even though I have background rendering enabled in prefs the option to background render an export was by default turned off. When I highlight a project, share export, under the Advanced tab choose “This computer”. After that continue the export and after it begins you will be back in the project library able to que up another.

  8. Is anyone asking Apple to include a batch export function? It seems an obvious oversight.

  9. Daniele says:

    Claire was right, same for me, but it don’t depends on hardware… Just while export run I can’t click anywhere on the final cut window, it need the export to end.
    Which FCPX version this article is based on?

    • Larry Jordan says:

      This ability showed up with the 10.0.6 update.

      Larry

      • Peter Swanson says:

        I have 10.0.8 and I can’t find a batch export function.

        • Larry Jordan says:

          Peter:

          There isn’t a “batch export” function as such. Instead, because exporting happens in the background, you can quickly – as this article describes – send multiple files into export without waiting for the first file to finish.

          Larry

          • Larry Jordan says:

            Also, all exporting happens in the background and the speed of export is determined by the speed of your system and the complexity of your projects.

            While we can very rapidly queue projects for export, exporting itself can take time.

            You can speed exporting by not doing any editing while exporting is going on. Because exports run in the background, anytime you do something in FCP in the foreground, or in another application, the background processes pause until you are done.

            This is true for all background processes, not just FCP X.

            Also, make sure you are not converting the media during export. Create a master file (File > Share > Master file) that matches your project settings. That gets the files out of FCP X the fastest. Then, convert them using compression software after export is complete.

            Larry

  10. Paul Clark says:

    A “how to” that was not only easy to follow but actually works. Thank you.

    Now if only Apple could add a batch export function, and a way to save a Gaussian Blur preset without having to but Motion.

Leave a Reply to Jimmy Q2 Cancel reply

Your email address will not be published. Required fields are marked *

Larry Recommends:

FCPX Complete

NEW & Updated!

Edit smarter with Larry’s latest training, all available in our store.

Access over 1,900 on-demand video editing courses. Become a member of our Video Training Library today!

JOIN NOW

Subscribe to Larry's FREE weekly newsletter and save 10%
on your first purchase.